It happens, you're rushing a reload to beat the clock or take another shot at that buck before he disappears. You drop your loader and crunch….you stepped on it and now its bent.

While we try to make our speed loaders as rugged as possible, sometimes stuff happens.

All Gen 5 parts are compatable with earlier models of speed loader.

Plungers, handles, detents and pins are generic parts used accross all models in the SL001/SL002 series.

To replace GEN 5 speed loader heads we reccomend soaking in hot water (not boiling) until the material softens, and twist off with multi grips or similar.

GEN3 to GEN4.5 nylon heads will have to be sanded off with a belt sander or similar. Earlier aluminium heads are fixed with loctite 680 and require heating to 250°c- please use cation when using heat or power tools.

To install, a block of wood with a 25mm (1”) hole is useful to hold the loader head while driving the loader tube into the socket with a soft faced mallet.